80346 Water Otter 1200 PSI Pressure Washer Pump for Tile Carpet Cleaning

80346 Water Otter 1200 psi Pressure Washer Pump For Tile Carpet Cleaning and Misting systems AS1200 Shock Wave 360U Description Turn any portable extractor into an incredible tile and grout machine with the Water Otter! The worlds #1 best selling carpet and tile cleaning pump. This is the same pump installed under the hood of 90% of the tile cleaning machines on the market today. By hooking your pressure hose to the Water Otter instead of your portable extractor, you'll get 1200 psi of raw power to blast grout lines clean! Now you just need to hook your vac hose to your portable extractor, and put on a good tile and grout tool (SX-12 or Gekko come to mind) and you're ready to clean tile with the best! Clean at 500 psi for carpet cleaning or turn it down to 200 psi for upholstery cleaning. Also used as a high pressure misting system pump. Commonly used with 12" spinner tile wands or smaller. Specification Commercial Duty American-Made Pump and Motor 1,000 - 1,200 psi, 2.2 GPM at Nozzle Tip (turn down pressure if you like to as low as 200 psi) 14.3 Amp High Efficiency Motor Maintenance-Free 1,200 psi Pump 1,000 Hour Continuous, Full Load Rated Simple Repair, Low Cost Parts Each Component The Best Available GFCI with 35' Cord (120 volt versions only) Female Garden Hose Inlet 1/4 Female Quick Connect Outlet Max Water Temperature 140 degrees 120 Volt, 8 to 15 amps (depending on pressure), 240 volt version is this amp draw cut in half. fitted with an m44 motor, this is the motor used for a hard surface pumping system that is outside the extractor case. Does come with a pressure gauge. Out of box measurements 14" X 11" 11" H Shipping wt: 50#s Shipping dimensions: 20" X 16" X 15" Amp draw is 7.5 amps to turn on + 1 amp for each 200 psi you ask it to push. Example 500 psi uses 10 amps @ 120 volts