CUSTOM CUT | Up to 36" | HEAVY DUTY Satin Brass Closet Rod | 32mm Dia. Round Clothes Pole | Matching "Rear Pin" End Brackets

Help Has Arrived!!!!Have you been putting off that closet upgrade because of the dreaded chore of cutting the rod to length? The slipping hacksaw blade, the crooked cuts, the jagged edges... Arrrrg! Well, your life just got 10X easier. We got this!Easy-Peezy Ordering Click the "Customize Now" button, give us the CLOSET WALL OPENING, and we'll cut your rod to a perfect factory finish, and deliver it in no time flat!Heavy Duty!Once you hold it in your hand, you'll know what we're talking about. This rod is made from steel that's .050" thick, so you shouldn't need a center support for any length up to 72". Bring on those heavy winter coats!Multi-Step FinishSome manufacturers do the finishing as the raw goods leave the steel mill. Not us! We POLISH our rods first,THEN apply a generous and beautiful finish that will last for years to come!"System" End SupportsThe 2 provided end supports have 5mm pins that project out the back. These will fit all typical prefabbed cabinets with "system holes" drilled at 32mm increments. BTW, our rear pins have 4 "tapered wedges" that bite into the wood for a nice, snug fit! There's even a set screw to lock the rod in once you're done! If you prefer brackets that just screw into the wall, search on Amazon for B08MWM4NV5.Installation Easy as 1,2,3Step 1 - Insert the end brackets into the pre-drilled holes of your closet panelsStep 2 - Drop in the pre-cut rodStep 3 -Actually, there is no 3rd step. You're done! ("Easy as 1,2" didn't have the proper ring to it)! OK, if you realllllly want to go overboard, we do include a set screw for extra security, but it's usually not necessary.Here's what you get...- One custom-cut 32mm diameter closet rod- Two matching rear-pin end brackets with set-screws- Two ¾” matching wood screws

• ✅CUSTOM CUT - We do the hard part so you don't have to! Just give us the OPENING WIDTH of your closet and we'll cut the rod to a perfect factory finish and have it on your doorstep in no time flat!
• ✅HEAVY DUTY - Between the 32mm diameter and the thick .050 side walls, this rod can handle just about anything you can throw at it! Bring on those heavy winter coats!
• ✅FLAWLESS FINISH - Unlike many other manufacturers, we POLISH our rods after the come out of the mill and THEN apply a flawless finish that will look great for years to come!
• ✅"REAR PIN END BRACKETS INCLUDED - Our end brackets have two 5mm studs that project out the back. These will fit perfectly in all prefabbed closet panels that use "system holes" drilled at 32mm increments. Naturally, they'll fit our rods like a glove and have the same perfect finish. There's even a handy set screw that locks the rod in place, a great safety feature!
• ✅WHITE GLOVE SERVICE - We treat your order like it's going into our own home. That means super fast turnaround time, precise cutting, and protective packaging!