Harvia KIPW Series Sauna Heater, with Xenio Control Bundles (Sauna Stones Included) (KIP45W - 240V/1PH)

The Harvia KIP heater is a traditional wall-mounted sauna heater with built-in controls. The heater is constructed with stainless steel and includes a protective stone guard. The heater has a large stone cavity for maximum heat release, and the dual wall construction allows the exterior to remain cool to the touch. The left dial controls the temperature and the right dial is the on/off control along with a delay timer. You can set the heater to turn on up to 8 hours after it is set, and the heater will automatically shut off after 60 minutes of operation.

• Wall-mounted. Stainless steel construction.
• Industrial grade, serviceable heating elements. UL listed. Direct rock-to-heating element contact.
• Designed, engineered, and made in Finland. Dimensions: 16"W (406mm) x 11"D (279mm) x 24"H (609mm).
• Kilowatt Rating (KW) - 3kW. 240V, Single Phase Amperage - 12.5 Amps. For sauna rooms from 84 to 130 cu. ft. 208V, 3-Phase Amperage - 8.3 Amps.
• Kilowatt Rating (KW) - 4.5kW. 240V, Single Phase Amperage - 18.8 Amps. For sauna rooms from 100 to 210 cu. ft. 208V, 3-Phase Amperage - 12.5 Amps.
• Kilowatt Rating (KW) - 6kW. 240V, Single Phase Amperage - 25 Amps. For sauna rooms from 170 to 300 cu. ft. 208V, 3-Phase Amperage - 16.7 Amps.
• Kilowatt Rating (KW) - 8kW. 240V, Single Phase Amperage - 33.3 Amps. For sauna rooms from 250 to 425 cu. ft. 208V, 3-Phase Amperage - 22.2 Amps.
• Each heater comes with a Harvia Xeno CX170. Included with the control, Digital Control, Data Cable, Temperature Sensor, Power Unit, Installation and Operation Manual
• The Harvia Xenio CX170 is a control unit with a touch control panel featuring Wi-Fi connectivity. The stylishly small, yet clear touch control panel is easy to install where you want it
• 208V/3PH is for commercial use only.