Huepar Laser Level 360 Self Leveling, 3x360° Green Cross Line Laser with LCD Screen and 656Ft Green Bilateral Laser Distance Measure, 3D Bluetooth Pulse Mode Laser Tool - S03CG & BLM-100G

Huepar S03CG 3D Laser Level 360 Self Leveling with 656Ft Green Bilateral Laser Measure, Laser Class: Class 2 (IEC/EN60825-1/2014), 1mW power output

• 【LCD Display & Bluetooth Tech】The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.
• 【High Efficiency Dual Measurement Tool】Bilateral laser measure can do two-direction measurements simultaneously. Measure reference can be adjusted to get bidirectional/unidirectional measurements for different measure needs. No need to move the medidor laser measuring tool frequently, greatly improves efficiency and saves time. Max bidirectional measure distance up to 656Ft, unidirectional measure distance up to 328Ft, ±1/16 inch high accuracy. A good choice for replacing the laser tape measure.
• 【Multifunctional Laser Tool】360° horizontal&360° vertical laser lines can be selected by separate H and V buttons. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser beeps when out of self-leveling range ±3.5°. Once pendulum locked, it switches to manual mode to lock lines at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG.
• 【Triple Power Methods & Type-C Port】This 360 laser tool adopted large capacity Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. The Li-ion battery has a Type-C charging port to be charged separately and can also be charged by phone, laptop, power bank, car charger, etc. The included battery holder is for installing 4 AA batteries to use the tool. The laser tool can be used at job site by plugged in when taking out the battery.
• 【Magnetic Bracket & Mounting Threads】Equipped with a magnetic bracket, the laser tool can be rotated at 360° randomly. The fine-tuning knobs on the bracket enable adjustment of the left and right position, front and back position within 2.16 in (5.5cm) , can also help adjust and lock the height within 3.74 in (9.5cm). The magnetic bracket offers 1/4"-20 and 5/8"-11 mount threads to suit different tripod threads. The laser tool also has 1/4"-20 mount thread to suit for tripods or pole mount.