JUUPINE 241x254mm Build Plate GECO Plate,PLA Cold Plate Supertack No Heating Spring Steel 0℃ Printing Hot Bed for Prusa MK4/MK4S/i3 MK3S/MK3/MK2/MK2.5/MK2.5S 3D Printer.

JUUPINE 241x254mm Build Plate GECO Plate,PLA Cold Plate Supertack No Heating Spring Steel 0℃ Printing Hot Bed for Prusa MK4/MK4S/i3 MK3S/MK3/MK2/MK2.5/MK2.5S 3D Printer.

• No Heat Required:​Specially manufactured for PLA,no need to wait for heating up the hot bed.Just set the printing plate to 1°C,with less power,it can save you more energy and reduce printing costs.The GECO Plate is also the first choice for farmers to print,stable printing, energy saving and reduce spaghetti.Note:Only PLA can be printed.
• Thicker and heavier:Our GECO plate is thicker and heavier than the regular PEI carbon plate. Thick and magnetic can make large prints do not warp, small and tall prints do not fall.​Flexible, detachable, double-sided design,Durable and easy to use.
• Wide Compatibility:The size of this geco plate is 241x254 mm and is compatible with a variety of 3d printer,such as Prusa MK4/MK4S/i3 MK3S/MK3/MK2/MK2.5/MK2.5S And other 3D printers of the same size,So please confirm the size of your printer hotbed before purchasing.
• Maintain Build Plate:After long-term repeated use, the plate needs to be repaired and cleaned(Before printing, you can clean the GECO plate by wiping it with alcohol or using soapy water to remove dust, oil, and fingerprints). Maintain the print platform: After long-term repeated use, the print build plate needs maintenance and cleaning. After cleaning, set the hot bed to 55℃ to heat the build plate, which will restore the adhesion of the build plate to its original state. (No printing is required during the maintenance process)
• Reusable,Perfect Adhesion:It has excellent adhesion without heating the platform,The model can be firmly attached to the GECO surface,Even beginners can print easily.Long term printing can still maintain 100% perfect adhesion,say goodbye to glue and spray, make every printing process smooth and effortless.
• Stable endurance, long-term use:GECO stabilizing coating is very durable and maintains stable adhesion evenafter long-term use. lt extends the service life of the printing plate and reducesthe cost of 3D printing.which is more low-carbon and environmentally friendly.After 400+ prints, the adhesion of the GECO printing plate is still about 80%.
• Matte texture:GECO plate has a beautiful surface texture and a full sci-fi style.The print will not transfer the surface texture,which can keep the bottom ofyour print delicate and uniform with coordinated texture.
• Note:Please note that when setting the temperature of the heated bed, we recommend that you set it below 40°C, otherwise it may cause damage to the plate.