Vintage Ceramic Pendant Light Hardwired, Brass E26 Socket with Rotary Switch, Sloped-Ceiling Compatible, Adjustable Gold Cord, Hanging Ceiling Fixture for Bedside, Kitchen, Entryway

This ceiling-wired pendant combines a fluted ceramic shade with a brass E26 lampholder and a rotary on/off knob for local control. The cord routes to a 12 cm (4.72″) canopy and mounts with the included US bracket on common 3–4″ round junction boxes. Daily operation can be at the fixture or from the wall (leave the knob ON). Pair with an E26 bulb up to 60 W actual to create a focused pool of light over counters, small dining tables, or reading spots. The 59″ braided cord trims to length and supports secure installation on flat or sloped ceilings. FAQ Q1: Is there a switch on the fixture? A: No. This version is designed for wall-switch control after hardwiring. Q2: Can it be installed on a sloped ceiling? A: Yes, when the junction box and bracket are secure. Adjust the drop so the shade hangs vertical. Q3: What bulb type fits? A: E26 base, up to 60 W actual. Bulb not included. A19/ST64/G25 are common choices. Q4: How long is the cord and can it be shortened? A: 59″ / 150 cm, trimmed during installation. Q5: What size junction box will the canopy cover? A: Most 3–4″ round US ceiling boxes. Q6: Where is it suitable to use? A: Indoor dry locations such as kitchen islands, dining bars, entryways, bedsides, and reading corners.

• 【 Appearance & Main Specs 】Cone-shape ceramic shade with vertical flutes and clean rim; brass E26 socket with rotary on/off switch; 59″ (150 cm) gold braided cord; 4.72″ (12 cm) round canopy with US mounting bracket; hardwired to a ceiling junction box (110–120 V); for indoor dry locations
• 【 How I install & what’s included】It’s hardwired: mounts to most 3–4″ round US junction boxes using the included 4.72″ canopy and bracket. In the box: fixture, canopy, bracket, screws, wire connectors, quick guide. I follow local electrical code or use a licensed electrician
• 【 How I switch it 】I keep the rotary knob on the socket in the ON position for everyday wall-switch use. When I’m standing next to the fixture, I can turn it off directly at the socket
• 【 How I set the height & where it fits 】The 59″ braided cord is trimmed during install to set the drop. It works on flat or sloped/angled ceilings as long as the box and bracket are secure and the shade hangs vertical. Typical guidance: fixture bottom 28–36″ above a counter or table; multi-pendant spacing 24–30″ center-to-center
• 【What bulb I use 】 It uses a standard E26 bulb base (compatible with E27), so finding the right light source is never a hassle.Up to 60 W actual (LED or incandescent; bulb not included). A19, ST64, or G25 shapes fit the open shade
• 【 Where I can hang it 】Works on flat or sloped/angled ceilings when the junction box and bracket are secure; keep the shade hanging vertical. Single pendant for a reading/coffee nook; two or three in a row for kitchen islands or dining bars. Typical setup: fixture bottom 28–36″ above counter/table; spacing 24–30″ C-to-C for multi-pendant runs
• 【 Use Conditions & Care 】This light is fantastic when hung in pairs over a kitchen island or as a single focal point above a nightstand or entryway table. It provides just the right amount of illumination to highlight your space without overpowering the room;Power off before cleaning; wipe the ceramic with a soft dry or slightly damp cloth.